Pioneer DC 40kW Small and Fast EV Charger
Product overview
At Pioneer, we want to establish a one-stop turnkey EV AC & DC Charging solutions that enable we are your first choice when it comes to implement EV AC & DC charger projects.
The Pioneer DC 40kW Small EV Charger was engineered with the highest safety standards in mind. The AC Charger was designed to meet the rigorous IP55 standard so it can easily be used indoors and outdoors. It supports OCPP 1.6J protocol and RFID. Owners can collect all data in an app and manage the charger.
Highest safety standards with the latest EV Charging features
- Support European standard CCS2 charging point
- ISO15118/DIN70121, IEC61851, IEC62196
- 10.1-inch high-definition LCD capacitive touch LCD, multi-language support
- RFID, Plug and Charge, QRCode
- Ethernet connection server
- Wide voltage (150~1000V), wide current (0-133A) output
- Smart charging power distribution load management
Technical Specifications
Installation (Hanging plug wire and plug head) | Wall-mount/Floor-stand |
Rated Power | 40KW |
Charging mode | Plug and Charge, RFID Swipe Card |
connection method | Type C |
Plug standard | CCS2 |
Standard | EN IEC-61851-1:2019; EN61851-23:2014; EN 61851-24:2014; EN IEC 61851-21-2:2021 |
Cable Length | 4m |
Input voltage | Three phase AC 380V±15%（3P+N+PE） |
Grid frequency | 50Hz/60Hz±1Hz |
Input current | 3<D66A |
Power-on input impulse current | ≤ Maximum input current 120% |
Input protection | Overvoltage, undervoltage protection, lightning protection, phase loss detection |
Input micro break | With Type A leakage micro-break |
Output current | 133A |
Output voltage | DC 150V~1000V |
Output current limit protection | Yes |
Output short circuit protection | Yes |
Stable current accuracy | ≤±1% |
Stable voltage accuracy | ≤±0.5% |
Ripple factor | ≤±0.5% |
effectiveness | ≥95% |
Power factor | ≥0.98 |
IP protection level | IP55 |
Wind tunnel | Bottom in top out |
cooling method | Smart air cooling |
Altitude | ≤2000m |
Noise | ≤60dB |
Working temperature | -30℃ ~ +50℃ |
Emergency stop detection | Emergency stop cuts off DC output |
DC voltage sampling | DC+, DC- output DC voltage sampling |
BAT battery sampling | BAT+, BAT- battery voltage sampling |
DC current sampling （Front end of DC contactor） | DC output current sampling |
Measurement accuracy | Level 1 |
Battery reverse connection detection | Prevent the gun tip or battery from being reversed |
Connection temperature | Plug temperature detection |
Ambient temperature | Temperature check inside the case |
Insulation detection | DC+ and PE, DC- and PE impedance |
Leakage current detection | 30mA leakage protection switch |
Protective function | Output short circuit protection, output over voltage protection, output over current protection, fan failure alarm |
Size | 792*580*290mm |
LCD | High-definition highlight industrial touch screen |
LED | Charging green, fault red |
Button | EPO（Emergency stop detection） |
USB upgrade | Firmware upgrade |
Welding inspection | 1 second discharge below 60V |